Bucket hinge pin: 131.1 in | Top of ROPS: 80.4 in | Bottom of level bucket, fully raised: 123.0 in | Dump with foundry/excavating bucket short lip: 104.5 in @ 45°/with low profile/standard lip bucket:101.6 in @ 45° | Dump reach (max height): 37 in @ 45°
Specifications
2024
New Holland Construction
Compact Track Loaders
C332
General
F5H FL463A*G001
FPT
Diesel 4-stroke, turbo, D.I
4
3.9 in
4.3 in
207 in3
Liquid
Gross HP: 74 HP @ 2500 rpm | Net: 68 HP @ 2500 rpm
2.75 in3 | max: 3.10 in3
Torque @ max displ. and relief pressure: 4654 lb-ft
#2 diesel | Filter: Pre-spin on 30 microns Main-spin on 4 microns
HPCR Direct
High idle - no load: 2500 +/- 25 rpm | Rated - full load: 2500 rpm | Low idle: 1150 +/- 25 rpm | Speed @ high idle engine: 103 rpm
Dump angle: 55 degrees | Bucket on ground: 333 degrees | Bucket at full height: 85 degrees | Angle of departure: 32 degrees | Track guage: 58.6 in
with foundry/excavating bucket short lip: 160.2 in | with low profile/standard lip bucket: 164.4 in | with low profile extended/long lip bucket: 169.2 in
Bucket hinge pin: 131.1 in | Top of ROPS: 80.4 in | Bottom of level bucket, fully raised: 123.0 in | Dump with foundry/excavating bucket short lip: 104.5 in @ 45°/with low profile/standard lip bucket:101.6 in @ 45° | Dump reach (max height): 37 in @ 45°
without attachment with coupler: 117.3 in | with foundry excavation bucket on ground: 141.7 in | with low profile bucket: 147 in | with low profile extended bucket: 150.8 in
Track on ground: 64.5 in | (bottom of belly pan): 9.6 in | without bucket: 56.2 in | with foundry bucket in carry position: 86.6 in with 78” bucket | with low profile bucket on ground: 90.4 in with 78” bucket | with extended low profile on ground: 94.8 in with 78" bucket | Clearance circle rear: 67 in
76.5 in
24.2 gpm
Charge pressure: 362 psi | System relief: 5220 psi