Back

2024 New Holland Construction Compact Track Loaders C332

761638 EH2-BASIC-ROPS
MoreLess
Limited Time Offer!

Selling Price -$55,500.00

No Images Available

Selling Price -

$55,500.00

HD Certified Pre-Owned
Warranty start date 0/06/2024
  • 2024
  • New Holland Construction
  • Compact Track Loaders
  • C332
  • General
  • F5H FL463A*G001
  • FPT
  • Diesel 4-stroke, turbo, D.I
  • 4
  • 3.9 in
  • 4.3 in
  • 207 in3
  • Liquid
  • Gross HP: 74 HP @ 2500 rpm | Net: 68 HP @ 2500 rpm
  • 2.75 in3 | max: 3.10 in3
  • Torque @ max displ. and relief pressure: 4654 lb-ft
  • #2 diesel | Filter: Pre-spin on 30 microns Main-spin on 4 microns
  • HPCR Direct
  • High idle - no load: 2500 +/- 25 rpm | Rated - full load: 2500 rpm | Low idle: 1150 +/- 25 rpm | Speed @ high idle engine: 103 rpm
  • Dump angle: 55 degrees | Bucket on ground: 333 degrees | Bucket at full height: 85 degrees | Angle of departure: 32 degrees | Track guage: 58.6 in
  • with foundry/excavating bucket short lip: 160.2 in | with low profile/standard lip bucket: 164.4 in | with low profile extended/long lip bucket: 169.2 in
  • Bucket hinge pin: 131.1 in | Top of ROPS: 80.4 in | Bottom of level bucket, fully raised: 123.0 in | Dump with foundry/excavating bucket short lip: 104.5 in @ 45°/with low profile/standard lip bucket:101.6 in @ 45° | Dump reach (max height): 37 in @ 45°
  • without attachment with coupler: 117.3 in | with foundry excavation bucket on ground: 141.7 in | with low profile bucket: 147 in | with low profile extended bucket: 150.8 in
  • Track on ground: 64.5 in | (bottom of belly pan): 9.6 in | without bucket: 56.2 in | with foundry bucket in carry position: 86.6 in with 78” bucket | with low profile bucket on ground: 90.4 in with 78” bucket | with extended low profile on ground: 94.8 in with 78" bucket | Clearance circle rear: 67 in
  • 76.5 in
  • 24.2 gpm
  • Charge pressure: 362 psi | System relief: 5220 psi
  • 25.5 gal
  • with filter: 8.9 qt
  • System capacity with filter: 47 qt
  • Operating: 9630 lbs
  • 9300 lbs
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $55,500.00
  • Chattanooga, Tennessee
  • Pre-Owned
  • 006924
  • 2024
  • New Holland Construction
  • Compact Track Loaders C332
  • JAF0C332LPM446678
  • F5H FL463A*G001
  • Available
  • Bucket hinge pin: 131.1 in | Top of ROPS: 80.4 in | Bottom of level bucket, fully raised: 123.0 in | Dump with foundry/excavating bucket short lip: 104.5 in @ 45°/with low profile/standard lip bucket:101.6 in @ 45° | Dump reach (max height): 37 in @ 45°

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.